Study of Adhesive Wear of Epoxy Reinforced with glass fibers Composite Material
Keywords:
Wear of Epoxy, glass fibersAbstract
The dry wear, compression resistance and hardness of a material that consists of Epoxy reinforced with (25%) ratio of
Glass fiber have been Studied.
A comparison is made between the properties of the composite at temperature ( 20 2 0C) with those of un reinforced
Epoxy to find out the effect of reinforcement on the composite. Volume fraction for specimen was (25%) and the
reinforcement material were continuous fiber oriented in woven raven.
The measurement of wear rate shows a decreases with reinforcement. Compression resistance and Hardness increase
with reinforcement.
The results of compaction have clearly shown that wear rate and wear rate volume increasing normal applied load,
sliding distance, time sliding and hardness of disc. The results also show that wear rate and wear rate volume for all
materials increases with normal applied load and running time. The results also show that wear rate and wear rate
volume decrease with increasing the applied with increasing the hardness of disc and sliding distance.
The topography of some physically tested was studied using optical microscopy
Downloads
Downloads
Published
Issue
Section
License
The authors retain the copyright of their manuscript by submitting the work to this journal, and all open access articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC 4.0), which permits use for any non-commercial purpose, distribution, and reproduction in any medium, provided that the original work is properly cited.
