The Effect of Reinforcement Density on The Deflection of Reinforced Soil Retaining Wall
Keywords:
Retaining wall, vertical spacing of reinforcin strips, horizontal spacing of reinforcing strips, length of reinforcing strips, deflection.Abstract
This research involves the effect of both vertical and horizontal spacing, as well as the length of the reinforcing strips, on the structural behavior of a model reinforced soil retaining wall. The tests were carried out on a small-scale laboratory model, in which uniform graded sand was used as a fill material. It was placed at a high dense state; raining technique was used for this purpose. The sand was reinforced with thin dipped Aluminum strips. The size of these reinforcing strips was chosen sufficient enough to prevent rupture mode of failure. The retaining wall was presented by a plastic transparent sheet. The results showed that the horizontal spacing is more significant parameter on deflection of the wall as compared to the vertical spacing of the reinforcing strips. The critical values of the horizontal and vertical spacing with respect to this research were 20 and 10 cm respectively. A short length of reinforcement proved to
cause appreciable deflection of the wall, even under close horizontal and vertical spacing
Downloads
Downloads
Published
Issue
Section
License
The authors retain the copyright of their manuscript by submitting the work to this journal, and all open access articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC 4.0), which permits use for any non-commercial purpose, distribution, and reproduction in any medium, provided that the original work is properly cited.
