The Deflection Control of a Thin Cantilever Beam by Using a Piezoelectric Actuator / Sensor
Keywords:
Smart Beam, Ordinary Beam, Bernoulli- Euler Equation, Voltage Amplifier, and Lead Network Controller.Abstract
In this research, the governing equation of the thin smart beam transverse deflection was derived by the same procedure that the Bernoulli-Euler equation
derived but with some additional mathematical terms to be valid for describing the smart beam. The engineering control techniques were used to obtain the solution of the proposed differential equation for the smart cantilever beam where with some auxiliary equations and modifications a block diagram for any
type of applied load (static, or cyclic) as the input and the beam deflection as the output was constructed. For insuring an efficient reduction in the beam deflection an integrated system with a voltage amplifier and lead controller was designed. Many cases were studied and simulated including the variation of load nature, and the number of collocated piezoelectric actuator/sensor pairs and in all cases a valuable deflection reductions were
obtained
Downloads
Downloads
Published
Issue
Section
License
The authors retain the copyright of their manuscript by submitting the work to this journal, and all open access articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC 4.0), which permits use for any non-commercial purpose, distribution, and reproduction in any medium, provided that the original work is properly cited.
